|
|
|
  |
|
| |
 |
|
FILLER BY FLOWMETER / CAPPER AUSERE
Fully automatic rotary machine to fill products with any viscosity and conductivity (STILL WATER, JUICE, OIL, DETERGENT,…).
Filling system by flowmeter:
Depending on the product, the high accuracy flowmeters could be mechanical by oval gears, magnetic or mass, with filling valves with a perfect opening and closing. The filling group consists of a control system and a flowmeter per each valve. The machine is equipped with a product tank to feed to valves by means of a manifold placed on the flowmeters. The system works without pressure in the bottle and with slight pressure in the tank. Due to the small number of its functional parts, the filling circuit can be cleaning easily.
|
|
| Bottles go into the filling group by means of a starwheel and are clamped by a pliers at its neck. The dosing can be with distance from the neck or bottom-up, depending on the product is foamy or not.
- Tank, inlet pipe for product and filling valves are all made of stainless steel
- Safety protections made of methacrylate following the CEE Standards.
- Flowmeters does not need require and specific maintenance.
- Maximum filling accuracy: ± 1,5 grams per liter.
As for the closure on the bottles, an automatic capper can be mounted for pressure, screwed or aluminium (pilfer proof) caps thus forming a MONOBLOCK with the filler. The capper consists of an accumulating hopper for the caps, cap orientator, a chute and a wheel for pressure closures or a chuck heads group for threaded closures.
As with the monoblock, you can also include a blower/rinser thus forming a TRIBLOCK with a filler and capper as seen in the photo. This is a mechanical rotary machine equipped with the right number of heads to assure an optimal time period to adjust to the requirements. Both capping and blowing groups have included its motorized regulation system to adjust the height of the groups.
Optional Accessories:
- Caps Elevator.
- Production monitoring program.
- “No cap – no bottle” control system.
- Both the capper and blower/rinser can be purchased separately.
These machines can be equipped from 6 up to 70 filling valves depending on the speed requirements and product specifications. |
| |
|
|
VOLUMETRIC FILLER /
CAPPER AUSERE
Fully automatic rotary machine
to fill viscous products (OIL, DETERGENT, SHAMPOO,
etc) in GLASS, PLASTIC, CANS, etc.
Volumetric filling system:
Consist of a set of dosing cylinders and filling
valves that open and close perfectly.
Its high capacity tank, which
is built in stainless steel with the filling pipe
leading directly from the tank, is located over
the nozzles. |
|
| The
bottles enter into the filling section using a starwheel,
and are placed on the moveable supports which take the
bottles up to the nozzles and fills them into the walls
of the bottles so as to avoid any emulsion of the liquid.
- Simultaneous adjustment of the
measure on all the dosing cylinders
- Holding tank, inlet tubing for liquid
and nozzles are all made of stainless steel.
- Safety guard protector made of methacrylate
as per the CEE regulations.
- Maximum accuracy filling: +/- 1,5
grams per liter
As with the previous fillers, you can also include an automatic capper for pressure, screwed or aluminium (pilfer proof) caps thus forming a MONOBLOCK with the filler, and a blowing group as a TRIBLOCK.
Optional Accessories:
- Cap Elevator
- Production monitoring program
- "No cap-no bottle" control
system
- Both the capper and blower/rinser
can be purchased separately |
| |
 |
 |
 |
 |
| |
|
|
|
|
PRODUCTION
BOTTLES - HOUR |
| MODEL |
LENGTH |
WIDTH |
HEIGHT |
POWER |
1
LITER |
2
LITERS |
| HAM-12/NN |
1200 |
1405 |
3000 |
1
Kw |
3000 |
- |
| HAM-12/NN-2 |
1525 |
1680 |
3000 |
1,5
Kw |
3000 |
1800 |
| HAM-20/NN |
1525 |
1710 |
3000 |
1,5
Kw |
6000 |
- |
| HAM-20/NN-2 |
1660 |
1870 |
3000 |
1,5
Kw |
6000 |
3500 |
| HAM-34/NN |
1805 |
1970 |
3000 |
1,5
Kw |
10000 |
- |
| HAM-40/NN-2 |
2550 |
2800 |
3000 |
2,2
Kw |
- |
8000 |
| HAM-50/NN |
2300 |
2505 |
3000 |
2,2
Kw |
14000 |
- |
| HAM-60/NN |
2600 |
2820 |
3000 |
4
Kw |
18000 |
- |
| HAM-70/NN |
2750 |
3170 |
3000 |
4
Kw |
22000 |
|
|
 |
 |
 |
 |
|
| |
 |
|
LEVEL
FILLER/CAPPER AUSERE
Fully automatic rotary filler
for use in filling liquid products (WATER, VINEGAR,
JUICE, etc) in GLASS and PLASTIC containers.
Gravity filling system:
Gravity/level or gravity/level
in addition to vacuum system, depending on the
type of liquid.
Its high capacity tank, which
is built in stainless steel with the filling pipe
leading directly from the tank, is located over
the nozzles. |
|
The bottles enter into the filling section
using a starwheel, and are placed on the moveable supports
which take the bottles up to the nozzles and fills them
into the walls of the bottles so as to avoid any emulsion
of the liquid.
- Holding tank, inlet tubing
for liquid and nozzles are all made of stainless steel.
- Safety guard protector made of methacrylate
as per the CEE regulations.
- Precise level filling.
As with the previous fillers, you can also include an automatic capper for pressure, screwed or aluminium (pilfer proof) caps thus forming a MONOBLOCK with the filler, and a blowing group as a TRIBLOCK.
Optional Accessories:
- Cap Elevator
- Production monitoring program
- "No cap-no bottle" control
system
- Both the capper and blower/rinser
can be purchased separately |
| |
|
|
|
|
| |
|
|
|
|
PRODUCTION
BOTTLES - HOUR |
| MODEL |
LENGTH |
WIDTH |
HEIGHT |
POWER |
1
LITER |
1,5
LITERS |
5
LITERS |
| HAM-10/G |
1780 |
2005 |
3000 |
1,5
Kw |
- |
- |
1300 |
| HAM-16/G |
1900 |
2150 |
3000 |
1,5
Kw |
- |
- |
2000 |
| HAM-26/G |
2600 |
2820 |
3000 |
2,2
Kw |
- |
- |
4000 |
| HAM-20/V |
1200 |
1465 |
3000 |
1
Kw |
6000 |
4500 |
- |
| HAM-30/V |
1500 |
1800 |
3000 |
1,5
Kw |
8500 |
7000 |
- |
| HAM-40/V |
1750 |
2100 |
3000 |
1,5
Kw |
12000 |
10000 |
- |
| HAM-50/V |
2100 |
2430 |
3000 |
1,5
Kw |
15000 |
12000 |
- |
| HAM-12/AG/5 |
1400 |
1635 |
3000 |
1,5
Kw |
- |
2500 |
1200 |
| HAM-16/AG/5 |
1670 |
1920 |
3000 |
1,5
Kw |
- |
4000 |
1600 |
|
|
|
|
|
|
|
|
 |
|
|
|
| |
|
|
