|
|
|
  |
|
| |
 |
|
INLINE FLOWMETER FILLER
MACHINE MOD. LD–CA AUSERE
This is a Filler machine providing
volumetric filling system with magnetic “FLOW
METERS”. The volume-detecting instrument
is placed before the filling valve and without
any built-in obstructive parts, such providing
an undisturbed flow.
Flowmeter filling allows infinitive
volume range while retaining inherent accuracy.
In the Fillers Model CA the
liquid, thick and viscous products arrive to the
filling valves directly through the manifold and
the connecting pipes with the valves, in closed
circuit and with a slight pressure. Simultaneous
setting of the volume to be filled for all filling
stations.
|
|
|
The self-draining center manifold and direct
distribution of product to all filling heads, combined
with our pump control, reduces product change time,
minimizes products losses and ensures lowest energy
costs.
- Level control performed by a capacitive
sensor.
- These volumetric fillers allow filling
the bottles up to the top of the neck using the bottom-up
system in the nozzles.
- The filling is operated in two parallel
lines, while the bottles are filled in one of them,
the charge and discharge the bottles is operated in
the other line. Due to this is possible to eliminate
the dead time for bottle transport.
Very compact design. Suitable for CIP.
- Design adapts to 4, 6, 8, 10 or 12 fill
heads for improved speed and fill times.
- Filler speeds from 30 to 300 bpm
for most flowable products and container sizes.
|
| |
 |
 |
 |
 |
| |
|
|
|
CONSUPTION |
| MODEL |
LENGTH |
WIDTH |
HEIGHT |
ELECTRICAL |
PNEUMATIC |
| LD-12-CA |
4880 |
1500 |
3125 |
4
Kw |
200
LIT/Minute |
| LD-10-CA |
4880 |
1500 |
3125 |
4
Kw |
200
LIT/Minute |
| LD-8-CA |
4320 |
1500 |
3125 |
3
Kw |
150
LIT/Minute |
| LD-6-CA |
4320 |
1500 |
3125 |
3
Kw |
100
LIT/Minute |
| LD-4-CA |
3820 |
1500 |
3125 |
2,5
Kw |
100
LIT/Minute |
|
 |
 |
 |
 |
|
| |
 |
|
INLINE VOLUMETRIC FILLER/CAPPER AUSERE
Fully automatic inline machine to fill viscous products (OIL, DETERGENT, SHAMPOO...) in glass, plastic, cans, etc.
Volumetric by piston filling system and filling valves that open and close perfectly. The movement of the pistons are driven by a servomotor. The functioning of the machine is got by bottles accumulation, being adjustable the detection and blocking devices for different containers.
|
|
- Tank, inlet pipe for product and filling valves are all made of stainless steel
- Safety protections made of methacrylate following the CEE Standards.
- Maximum filling accuracy: +/-2 grams per liter.
As for the closure on the bottles, an automatic capper can be mounted for pressure, screwed or aluminium (pilfer proof) caps thus forming a MONOBLOCK with the filler. The capper consists of an accumulating hopper for the caps, cap orientator, a chute and a wheel for pressure closures or a chuck head for threaded closures. |
| |
|
|
|
|
| |
PRODUCTION |
| MODEL |
BOTTLES/HOUR 1 LITER |
CARAFES/HOUR 5 LITER |
| HAM-4.4.5/CNC |
1.250 |
500 |
| HAM-6.6.5/CNC |
1.700 |
650 |
|
|
|
|
|
|
| |
|
|
INLINE FILLER BY FLOWMETER / CAPPER AUSERE
Fully automatic inline machine to fill viscous products (OIL) in glass, plastic, cans, etc.
|
|
Volumetric filling system by mechanical oval gears or mass flowmeters. The filling group consists of a control system and a flowmeter per each valve. The functioning of the machine is got by bottles accumulation, being adjustable the detection and blocking devices for different containers. The system works without pressure in the bottle and with slight pressure in the tank. Due to the small number of its functional parts, the filling circuit can be cleaning easily.
- Tank, inlet pipe for product and filling valves are all made of stainless steel
- Safety protections made of methacrylate following the CEE Standards.
- Maximum filling accuracy: +/- 1,5 grams per liter.
As for the closure on the bottles, an automatic capper can be mounted for pressure, screwed or aluminium (pilfer proof) caps thus forming a MONOBLOCK with the filler. The capper consists of an accumulating hopper for the caps, cap orientator, a chute and a wheel for pressure closures or a chuck head for threaded closures. |
| |
|
|
|
|
| |
PRODUCTION |
| MODEL |
BOTTLES/HOUR 1 LITER |
CARAFES/HOUR 5 LITERS |
| HAM-4.4.5/ASM |
1.250 |
500 |
| HAM-6.6.5/ASM |
1.700 |
650 |
|
|
|
|
|
|
| |
|
|
SEMI-AUTOMATIC FILLERS AUSERE
AUSERE also manufactures semi-automatic fillers with one or two nozzles. Bottles are placed manually under the nozzle. The volume is prefixed by the control panel, where the filling stage is activated. All these fillers are easily working by the operator.
|
|
Depending on the product, the container and the required speed, the dosing system of these equipments could be by gravity with level closure, or by flowmeter (mechanical , electromagnetic or mass) technology fed by a pump. Moreover, AUSERE could supply a semi-automatic equipment for capping bottles.
|
| |
|
|
 |
|
|
|
| |
|
|
